copy of SANICUBIC 2 XL

The SANICUBIC 2 XL is ideal for residential buildings, commercial buildings, restaurants, schools, hotels, shopping centres.

  • 2 motors for more intensive use
  • Numerous inlets available
  • Standard equipment


Aplicación

  • Uso comercial
  • Uso comunitario

The SANICUBIC 2 XL has vortex KXV6 technology enabling 50mm diameter evacuation. In addition, the two motors enable operation in all circumstances. Its 5 inputs make it possible to connect all the sanitary facilities required. It comes with remote control and alarm as standard. Lastly it is available in single-phase and three-phase versions. It is the most complete and the most high-performance in the SANICUBIC range.

 

This floor-standing pumping station is made in France at the Brégy (60) SFA factory. It has thus received the Guarantee of French Origin.

Ficha técnica

Peso (kg)
223 lbs.
Diámetro de entrada (pulgadas)
1 ½” (Entrada lateral y ventilación) 4" (top)
Tensión de alimentación
240 V - 60 Hz
Descarga horizontal máxima (m)
100 m
Descarga vertical máxima (m)
36 fr (2") or 20 ft (4")
Temperatura máxima del agua entrante (C°)
70 °C intermitente (máx. 5 min)
Diámetro de la tubería de descarga (pulgadas)
2" or 4"
Volumen del depósito (L)
31.7 gallons
Método de activación
Interruptor de presión / placa de circuito
Velocidad de flujo a 1 m
125 gal/min (473 liters/min) (2") or 137 GPM (518 liters/min) (4'')
Discharge rate at 36 ft
26 gal/min (98 liters/min) (2") or 90 GPM (340 liters/min) (4'')
Motor
1 HP motor térmico protegido con aceite
Capacidad del condensador (microfaradio)
2 x 30
Longitud del cable de alimentación (cm)
98
Cabeza Máxima (m)
43
Tiempo de funcionamiento normal (seg.)
Depende del numero de unidades
Toilet, Shower/bathtub base min height (in)
12
Agencias de certificación
CSA (IPC, NSPC)

copy of SANICUBIC 2 XL

  • Uso comercial
  • Uso comunitario